Ready Mix Resources & Safety Data Sheets

Access essential ready mix resources for CBM's concrete, including current price lists, Safety Data Sheets (SDS), and flex fuel surcharge details, all in one convenient location. These resources support project planning, compliance, and cost management for contractors and specifiers working with EkoCrete™ and other high-performance mixes.

2026 Eastern Region Price List for General Contractors

Our performance-optimised ready mix concrete blends feature Type GU Portland cement alongside supplementary cementitious materials for superior results. Note that CBM may adjust pricing based on specific project scope or order volumes. These rates take effect from January 15, 2026.

Ready-Mix Concrete

Strength Mixes
Includes 20mm Aggregate 80mm +/- 30mm slump

Strength Price/m3
10 MPa
$206.00
15 MPa
$209.00
20 MPa
$217.00
25 MPa​​
$225.00
30 MPa
$235.00
35 MPa
$246.00
40 MPa incl. EasyFlow MR
$279.00
45 MPa incl. EasyFlow MR
$288.00
50 MPa incl. EasyFlow HR
$325.00
60 MPa incl. EasyFlow HR
$346.00
Strengths greater than 35 ​MPa require a minimum load size of 3 m3

OBC Wall Mix
0.70 W/C, 180mm max slump

Strength Price/m3
15 MPa 20mm
$217.00
17.5 MPa 20mm
$221.00
20 MPa 20mm
$226.00

ICF Mix
10-14mm Aggregate, 180mm max slump

Strength Price/m3
20 MPa
$235.00
25 MPa
$243.00
OPSS Mixes Minimum 3.2 m3 load size (19mm Aggregate)
Strength Price/m3
15 MPa
$245.00
20 MPa
$255.00
25 MPa
$258.00
30 MPa
$263.00
35 MPa
$273.00
Special Cement Mixes
Type Price/m3
Silica Fume incl. EasyFlow MR
$75.00

Special Aggregate Mixes
(May not be available at some plants)

Type Price/m3
10mm & 14mm
$20.00
40mm
Upon Request
Heavy weight / lightweight
Upon Request
Colour aggregate (subject to availability)
Upon Request

Lean Mixes
Includes 20mm Aggregate. 80mm +/- 30mm slump

Strength Price/m3
0.4 MPa​ Unshrinkable Fill at 150mm slump
$180.00
0.7 MPa
$199.00
2.0 MPa
$200.00
4.0 MPa
$201.00
5.0 MPa
$202.00
7.0 MPa
$203.00

CSA Specified Mixes
80mm +/- 30mm Slump. Class of exposure in accordance with CSA A23.1-04, Table 1 & 2.

Class / Exposures ​ Min. Strength / W/C Ratio Price/m3
C-XL
50 MPa @ 56 days .40 W/C incl. EasyFlow HR
$360.00
C-1 S-1 / A1
35 MPa 0.40 W/C
$260.00
C-2 S-2 / A2
32 MPa 0.45 W/C
$246.00
C-3 F-1 S-3 / A3
30 MPa 0.50 W/C
$241.00
C-4 F-2 / A4
25 MPa 0.55 W/C
$231.00

Pump Grout Mixes

Strength Price/m3
30 MPa
$375.00
25 MPa
$345.00
15 MPa
$325.00
10 MPa
$310.00

Shotcrete
Includes 10mm or 14mm Aggregate, Air Entrainment, 80mm +/- 30mm Slump

Strength Price/m3
30 MPa
$253.00
35 MPa
$272.00
Tremie Mix
Ratio Strength Price/m3
230mm max slump
30 MPa
$289.00
COD Orders​ Price/m3
ADD
$50.00
Cost Recovery Charges
Environmental Charge Price/m3
$7.00
TOARC/MPAC Charge Price/m3
$1.00
Chute Wash (Where Available) Price/m3
$3.00
Concrete Cooling-Ice Price/m3
Concrete temperatures 26°C to 30°C
$90.00
Concrete temperatures 20°C to 25°C
$110.00
Concrete temperatures 20°C and under
$130.00
Winter Handling Price/m3
October 15 – April 30 inclusive
$22.00

After Hours Delivery
Regular hours: Monday to Friday 7 am to 5 pm.
For completion of deliveries started between 7 am and 5 pm:

Price/m3
After 5 pm and before 9 pm
$30.00
After 9 pm and before 7 am
$60.00 + Plant Opening
Saturday deliveries
$30.00 + Plant Opening
Plant Opening; deliveries from 7 pm to 6 am
$4000.00 Flat Rate
Each truck required
$2500.00
Delivery Charge Price/load
Load sizes 4 m3 – 3.2 m3
$175.00
Load sizes 3 m3 – 1.2 m3
$300.00
Load sizes 1 m3
$400.00
One part load allowed to finish a pour on orders exceeding 7 m3. The minimum load size is 1 m3.
Fuel Surcharge $2.00/m3
FLEX FUEL SURCHARGE: Pricing per index. ​Visit www.canadabuildingmaterials.com, Be a Customer
Restricted Load Charge Price/load
When Highway Traffic Act or Municipal restrictions are in effect, a Restricted Load Charge will apply
$350.00
Pour Cancellation Charge
A minimum $600 charge will apply to all pour cancellations. This charge includes expenses incurred for the first RMTO, Plant Manager, and Loader Operator. For each additional RMTO, an additional $200 charge will apply. Notice must be given one day prior to pour, to avoid this cancellation charge.
Additional Unloading Time Price/hour
90 Minutes per load will be allowed for unloading. Additional time will be charged at a $2.00 per min
$120.00
Tax Extras
Subject to any further increase by reason of government legislation.
Harmonized Sales Tax (HST)
13%
Quebec: T.P.S.
5%
Quebec: T.V.Q.
9.975%
BNQ Certificate (applicable for all deliveries in Québec)
$3.00 / m3
Terms
Prices on ready–mixed concrete are net and due for payment on or before thirty days after date of invoice. On overdue accounts, interest at 1.5% monthly (18% per annum) will be charged. The above prices are firm only if covered by a written quotation and are subject to ​terms and conditions thereon.
Ottawa/Hull – Blended Consumption Charge
$2.90 / m3
East Region – Industrial Emissions Charge
$1.00 / m3
All concrete prices are subject to a $15.00 / m3 escalator each January 1st.

ConcreteSolutions Products

Air Entrainmen​t

Strength Mixes Price/m3
40 MPa and higher
$12.00
Calcium Chloride Price/m3
1%
$8.00
2%
$12.00
Colours of Distinction Price
Red colour for conduit cover
$40.00​
All other colour mixes (Colour chart available on upon request)
Upon Request
Colour washout
$150.00/Truck
DelaySet Price/m3
2 hour set retarding
$16.00
6 hour set retarding
$20.00
EasyFlow Price/m3
Extended (Max. 230mm slump)
$30.00
High (Max. 190mm slump)
$20.00
Mid (Max. 150mm slump)
$16.00
Lightweight mixes (Requires EasyFlow)
Upon Request
FiberMax Price/m3
Micro
$22.00
Macro
Upon Request
RustGuard/Corrosion Inhibitors Price/L
$5.00

First-Up
Prices / m3. 75%* of 28 day strength in:

Strength 24 hours 48 hours 72 hours
20 MPa
ADD
$53.00
$46.00
$40.00
25 MPa
ADD
$55.00
$48.00
$42.00
30 MPa
ADD
$57.00
$50.00
$44.00
35 MPa
ADD
$59.00
$52.00
$46.00
40 MPa
ADD
$64.00
$54.00
$48.00
35 MPa C1
ADD
$65.00
$57.00
$50.00
*Based on proper curing temperatures in accordance with CSA requirements.
FlowFill​ Price/m3
​0.4 to ​5 MPa
$20.00
Get-Set Price/m3
Get-Set 1 (10°C to 8°C)
$35.00​
Get-Set 2 (7°C to 5°C)
$40.00
Get-Set 3 (4°C to -1°C)
$47.00
Get-Set 4 (-2°C to -7°C)
$60.00

Pump Mix

Min Strength P​umped Price/m3
20 MPa
$15.00​
Strengths over 25 MPa
Upon Request
Lightweight mixes (Requires EasyFlow)
Upon Request
TOARC/MPAC CHARGE $1.00 / m3

Your Guide to Exceptional Service

At CBM, we deliver premium ready-mix concrete on schedule with professional courtesy, all customized to your project’s needs as our valued partner.

Ordering Guidelines

CBM prioritizes quality products and reliable service for every ready-mix concrete order. Effective scheduling ensures on-time delivery, so we’ve streamlined these guidelines to optimize our resources and meet your expectations.

  • Advance notice: Order by 12:00 noon the prior day for optimal service.

  • Specify details: Provide total volume and pour rate (in cubic metres per hour) for accurate planning.

  • Confirmed orders: All initial orders must be confirmed—no provisional bookings.

  • Radio orders: Avoid if possible; if used, confirm by phone same day (balance orders accepted via radio).

  • On-call orders: Scheduled based on confirmed status and current workload.

  • Cancellations: Allowed only before truck loading.

  • Stay in touch: Notify dispatch immediately of any changes or delays.

Our Commitment to You

We arrive on time and keep concrete flowing once the pour begins, completing your full order efficiently, with extras supplied as capacity allows. Plant Managers and Dispatchers handle every order personally to secure the best slot.

Dispatch Hours

Orders accepted 7:00 a.m. to 5:00 p.m., Monday to Friday. Early morning or after-hours requests are scheduled per truck availability.

Quick Reminders for Smooth Delivery

  • Prepare your site thoroughly for seamless service.

  • Supply qualified flaggers and bucket handlers.

  • Minimize returns to support efficient operations for all customers.

2026 Western Region Price List for General Contractors

Our performance-optimized ready mix concrete blends incorporate Type GU Portland cement and supplementary cementitious materials for reliable results. CBM reserves the right to adjust pricing based on project specifications or order volumes. These rates take effect January 15, 2026.

Ready-Mix Concrete

CSA Specification Mixes
Maximum 100mm slump.

Class / Exposures ​ Min. Strength / W/C Ratio Price/m3
C-4 F-2 / A4
25 MPa 0.55 W/C
$289.00
C-3 F-1 S-3 / A3
30 MPa 0.50 W/C
$298.00
C-2 S-2 / A2
32 MPa 0.45 W/C
$305.00
C-1 S-1​ / A1
35 MPa 0.40 W/C <1500 Coulombs
$313.00
C-XL
50 MPa 0.40 W/C /56 days <1000 Coulombs incl. EasyFlow HR
$393.00

OPSS Mixes
Prices include water reducing and air entraining agents.

Strength Price/m3
15 MPa 20mm Aggregate
$283.50
20 MPa 20mm Aggregate
$294.50
25 MPa 20mm Aggregate
$299.50
30 MPa 20mm Aggregate
$308.00
35 MPa 20mm Aggregate
$327.00

Indutrial Floor Mix

Strength Price/m3
25 MPa 0.55 W/C Ratio incl. EasyFlow MR
$304.00
Includes 20mm Aggregate. Minimum 120+30 slump.

High Performance Mix

Strength Price/m3
50 MPa
$393.00
Includes T10SF Cement and EasyFlow HR

Strength Mixes
Includes 20mm Aggregate. Maximum 100mm Slump.

Strength Price/m3
10 MPa
$262.00
15 MPa
$266.00
20 MP​a
$274.00
25 MPa
$279.00
30 MPa
$290.00
35 MPa
$302.00
40 MPa incl. EasyFlow MR
$340.00

Residential Mixes

Strength Mix Price/m3
15 MPa 0.70 W/​​C
150mm Slump Maximum Wall
$271.00
20 MPa 0.70 W/​​C
150mm Slump Maximum Wall
$276.​50
25 MPa 0.65 W/​C
OBC Basement Floor
$282.00
32 MPa 0.45 W/C
OBC Garage Floor
$305.00

Lean Mixes
Includes 20mm Aggregate. Maximum 100mm Slump.

Strength Mix Price/m3
0​.4 ​MPa U fill
150mm Slump Maximum Wall
$249.00
0.7 MPa
150mm Slump Maximum Wall
$251.00
5.0 MPa
$258.00
8.3 MPa
Conduit mix (10mm aggregate)
$263.00

Caisson Mixes
Includes 20mm Aggregate. Maximum 150mm Slump.

Strength Price/m3
0.4 MPa Piling Mix
$249.00
2 M​Pa
$258.00
20 MP​a
$284.00
25 MPa
$291.00
30 MPa
$300.00

Pump Grout Mixes

Strength Price/m3
35 MPa
$410.00​
3​0 MPa
$390.00
25 MP​a
$365.00
20 MPa
$355.00
15 MPa
$345.00
10 MPa
$335.00

Special Aggregate Mixes

type Price/m3
10mm Stone
$20.00
10mm Round Pea Stone
$25.00
Quarry Sto​ne
$23.00
Light Weight, Traprock
Upon Request

COD Orders
Price on Request

COST RECOVERY CHARGES

Environmental Charge Price/m3
$7.00
TOARC/MPAC Charge Price/m3
$1.00
Sarnia Safety Surcharge Price/m3
Chemical Valley
$10.00
Concrete Cooling-Ice Price/m3
Concrete temperatures 26°C to 30°C
$90.00
Concrete temperatures 25°C and under
$110.00
Pour cancellation / restocking
As per quote
Winter Handling Price/m3
November 1 – April 30 inclusive​​​
$22.00
Conveyor Rentals Price/load
$310.00

After Hours Delivery
Regular hours: Monday to Friday 7 am to 5 pm.
For completion of deliveries started between 7 am and 5 pm:

Price/m3
After 5 pm and before 9 pm
$30.00
After 9 pm and before 7 am
$60.00 + Plant Opening
Saturday deliveries
$30.00 + Plant Opening
Plant Opening; deliveries from 7 pm to 6 am
$4000.00 Flat Rate
Each truck required
$2500.00
Restricted Load Charge Price/load
When Highway Traffic Act or Municipal restrictions are in effect, a Restricted Load Charge will apply
$350.00
Pour Cancellation Charge / Rescheduling Charge
$200 per RMTO. $600 minimum charge.

Minimum Delivery Charge
One part load allowed to finish pour on orders exceeding 7 m3. The minimum load size is 1 m3.

Price/load
Load sizes 4 m3 – 3.2 m3
$175.00
Load sizes 3 m3– 1.2 m3
$300.00
Load sizes 1 m3
$400.00

Additional Waiting/Unloading Time
90 minutes per load will be allowed for unloading. Additional time will be charged at $2.00 per minute.

Price/hour
$120.00
Trial Batch & Test Cylinders Price/mix
$880.00
Linear Shrinkage Testing Price/test
$2,750.00
Rapid Chloride Permeability Testing (RCP) Price/test
$2,200.00
Air Void System (AVS) Price/test
$1,100.00
Price/m3
Industrial Emissions Charge
$1.00
All concrete prices are subject to a $15.00 / m3 escalator each January 1st.
Fuel Surcharge $2.00/m3
FLEX FUEL SURCHARGE: Pricing per index. ​Visit www.canadabuildingmaterials.com, Be a Customer
Taxes Extra
Subject to any further increase by reason of government legislation.
Harmonized Sales Tax (HST)
13%
Chute Washout Price/m3
Where Applicable
$3.00

Terms

Prices for ready–mixed concrete are net and due for payment within thirty days of the invoice date. On overdue accounts, interest at 1.5% monthly (18% per annum) will be charged. The above prices are firm only if covered by a written quotation and are subject to ​the terms and conditions thereon.

ConcreteSolutions Products

RustGuard/Corrosion Inhibitors Price/litre
$5.00
DelaySet Price/m3
6 hour set retarding
$20.00
2 hour set retarding
$16.00

EasyFlow

Range Price/m3
Extended. Max. 230mm slump
$30.00
High. Max. 190mm ​slump
$20.00
Mid. Max. 150mm slump
​ $16.00
FiberMaxMI Price/m3
$22.00
FiberMaxFI Price/m3
$22.00
FiberMaxMA Price/m3
Upon Request
Re-Pel / Silica Fume Price/m3
CBM specification
Upon Request

Special Cement Mixes

Type Price/m3
Type 30 High Early (HE)
$30.00
Type 20 & 50 Equivalent (MS, MH & HS)
Upon Request
Type 20 & 50 Equivalent
Upon Request

First-Up
Prices / m3. 75%* of 28 day strength in:

Strength 24 hours 48 hours 72 hours
20 MPa
ADD
$53.00
$46.00
$40.00
25 MPa
ADD
$55.00
$48.00
$42.00
30 MPa
ADD
$57.00
$50.00
$44.00
35​ MPa
ADD
$59.00
$52.00
$46.00
40​ MPa
ADD
$64.00
$54.00
$48.00
35 MPa C-1
ADD
$65.00
$57.00
$50.00
*Based on proper curing temperatures in accordance with CSA requirements.
Jump Start Price/m3
$22.00
Get-Set Price/m3
Get-S​et 1 (10°C to 8°C)
$35.00
Get-Set 2 (7°C to 5°C)
$40.00
Get-Set 3 (4°C to -1​°C)​
$47.00
Get-Set 4 (-2°C to -7°C)
$60.00
Pump Mix Price/m3
$15.00
Colours of Distinction Upon Request
Colour washout
$150.00 / load
Calcium Chloride Price/m3
1%
$8.00
2%
$12.00

Your Guide to Reliable Service

CBM focuses on supplying top-grade ready-mix concrete precisely when needed, with a customer-first approach that adapts to your job site demands.

Streamlined Ordering Process

We’re dedicated to excellence in every ready-mix delivery. Clear scheduling drives success, so these updated guidelines help us allocate trucks and crews efficiently to hit your timelines.

  • Lead time: Submit orders by noon the day before to guarantee priority handling.

  • Key specs: Share exact yardage and hourly pour rate (cubic metres) upfront.

  • Firm commitments: First orders require full confirmation upfront.

  • Radio use: Limit to essentials; follow up by phone same day (subsequent calls okay via radio).

  • Flex orders: Booked once confirmed, subject to daily capacity.

  • Changes: Cancel only pre-load; alert us ASAP on delays.

  • Updates: Quick dispatch calls keep everything on track.

Service Guarantee

Count on us to show up ready and sustain your pour from start to finish, original quantities first, then add-ons as slots open. Dispatch and Plant Managers personally juggle schedules for your best fit.

Ordering Window

7:00 a.m.–5:00 p.m., Monday–Friday, for standard bookings. Off-hours accommodated based on fleet readiness.

Site Best Practices

  • Ensure access and layout are job-ready.

  • Provide skilled spotters and receivers.

  • Limit waste to keep service sharp for everyone.

Need a printer-friendly price list?

Download Price List (Print Friendly)

2026 GTA Region Price List for General Contractors

CBM’s high-performance ready-mix blends utilise Type GU Portland cement combined with supplementary cementitious materials for consistent quality. Pricing may be adjusted for specific project demands or quantities at CBM’s discretion. Effective January 15, 2026.

Ready-Mix Concrete

Strength Mixes
Includes 20mm Aggregate. Maximum 100mm Slump.

Strength Price/m3
10 MPa
$230.00
15 MPa
$235.00
20 MPa
$240.00
25 MPa​​
$245.00
30 MPa
$255.00
35 MPa
$270.00
40 MPa incl. EasyFlow MR
$301.00
45 MPa incl. EasyFlow MR
$319.00
50 MPa incl. EasyFlow HR
$343.00
55 MPa incl. EasyFlow HR
$349.00
Strengths greater than 35 ​MPa require minimum load size of 3 m3.

OPSS Mixes

Strength Price/m3
30 MPa 20 mm Aggregate
$275.00
35 MPa 20 mm Aggregate
$290.00
City of Toronto
Strength Price/m3
City of Toronto 24-Hour Track Mix
$360.00
480 kg min c/c Road Base Mix
$305.00

Industrial Floor Mix
Includes 20/40mm Aggregate. Minimum 120+30 slump.

Strength Price/m3
25 MPa 0.55 W/C incl. EasyFlow MR
$276.00

CSA Specifications Mixes
Maximum 100mm Slump. Class of exposure in accordance with CSA A23.1-09, Table 1 & 2.

Class / Exposures ​ Min. Strength / W/C Ratio Price/m3
C-4 F-2 / A4
25 MPa .55 W/C
$260.00
C-3 F-1 S-3 / A3
30 MPa .50 W/C
$265.00
C-2 S-2 / A2
32 MPa .45 W/C
$273.00
C-1 S-1 / A1
35 MPa .40 W/C
$280.00
C-1 S-1 / A1
40 MPa 0.40 W/C incl. EasyFlow MR
$321.00
C-XL
50 MPa 0.40 W/C incl. EasyFlow HR
$355.00

Residential Mixes

Class / Exposures ​ Min. Strength / W/C Ratio Price/m3
R1 Exposures Min.
15 MPa 150mm Slump Max Wall Mix .70 W/C
$245.00
R2 Exposures Min.
20 MPa 150mm Slump Max Wall Mix .70 W/C
$250.00
R3 Exposures Min.
25 MPa 100mm Slump Max .65 W/C
$248.00
C-2 Exposures Min.
32 MPa 100mm Slump Max .45 W/C
$273.00

Lean Mixes
Includes 20mm Aggregate. Maximum 100mm Slump.

Strength Price/m3
0.4 MPa​ Unshrinkable Fill at 150mm slump
$215.00
0.7 MPa
$217.00
4.0 MPa
$221.00
5.0 MPa
$223.00
7.0 MPa
$225.00

Caisson Mixes
Includes 20mm Aggregate. Maximum 150mm Slump​.

Strength Price/m3
0.4 MPa Piling Mix
$215.00
2.0 MPa
$218.00
20 MPa
$250.00
25 MPa
$255.00
30 MPa
$265.00

Pump Grout Mixes

Strength Price/m3
30 MPa
$375.00
25 MPa
$345.00
15 MPa
$325.00
10 MPa
$310.00
NOTE: Brick Sand
Upon Request

Special Cement Mixes

Type Price/m3
20 Portland Equivalent (MH & MS)
Upon Request
30 High Early Equivalent (HE)
Upon Request
10 SF Silica Fume (EasyFlow Required)
Upon Request
40 & 50 Equivalents (LH & MS)
Upon Request

Special Aggregate

Type Price/m3
10 mm Stone
$20.00
14 mm Stone
$20.00
40 mm Stone
Upon Request
10 mm Traprock
Upon Request

Lightweight Concrete Mixes

Type Target Density Price/m3
Semi Lightweight
2,000 kg/m3 Dry Weigh
Upon Request
Semi Lightweight
1,840 kg/m3 Dry Weight
Upon Request
Full Lightweight
1,600 kg/m3 Dry Weight
Upon Request
Additional charge will apply from Nov 1-April 30 for lightweight: $30.00

COST RECOVERY CHARGES

Environmental Charge Price/m3
$7.00
Fuel Surcharge $2.00/m3
FLEX FUEL SURCHARGE: Pricing per index. ​Visit www.canadabuildingmaterials.com, Be a Customer
Winter Handling Price/m3
November 1 – April 30 inclusive
$22.00
Concrete Cooling-Ice Price/m3
Concrete temperatures 26°C to 30°C
$90.00
Concrete temperatures 25°C and under
$110.00
Liquid Nitrogen
Upon Request

After Hours Delivery
Regular hours: Monday to Friday 7 am to 5 pm.
For completion of deliveries started between 7 am and 5 pm:

Price/m3
After 5 pm and before 9 pm
$30.00
After 9 pm and before 7 am
$60.00 + Plant Opening
Saturday deliveries
$30.00 + Plant Opening
Plant Opening; deliveries from 7 pm to 6 am
$4000.00 Flat Rate
Each truck required
$2500.00
Delivery Charge
One part load allowed to finish a pour on orders exceeding 7 m3. The minimum load size is 1 m3.
 
Price/load
Load sizes 4 m3 – 3.2 m3
$175.00
3 m3 – 1.2 m3
$300.00
1 m3
$400.00
Restricted Load Charge Price/load
When Highway Traffic Act restrictions are in effect, a Restricted Load Charge will apply.
$350.00
Additional Waiting/Unloading Time Price/hour
60 minutes per load will be allowed for unloading. Additional time will be charged at $2.00 per minute.
$120.00
TOARC/MPAC CHARGE Price/m3
$1.00

Pour Cancellation/Rescheduling Charge
A minimum $600 charge will apply to all pour cancellations. This charge includes expenses incurred for the first RMTO, Plant Manager, and Loader Operator. For each additional RMTO, an additional $200 charge will apply. Notice must be given by 12:00 noon the day prior to pour to avoid this cancellation charge. 

Taxes Extra
Subject to any further increase by reason of government legislation.

Harmonized Sales Tax (HST)
13%

Terms
Prices on ready-mixed concrete are net and due for payment on or before thirty days after the date of invoice. On overdue accounts, interest at 1.5% monthly (18% per annum) will be charged. The above prices are firm only if covered by a written quotation and are subject to the terms and conditions thereon.

Price/m3
Industrial Emissions Charge
$1.00
All concrete prices are subject to a $15.00 / m3 escalator each January 1st.

ConcreteSolutions Products

Air Entrainmen​t
Strength Mixes Price/m3
45 MPa and higher
$12.00
CSA Class of Exposure Specified Mixes
NO CHARGE
Calcium Chloride Price/m3
1%
$8.00
2%
$12.00
Colours of Distinction Price/m3
Colour mixes (colour chart available on request)
Upon Request
Colour washout
$150.00/Truck
DelaySet Price/m3
2 hour set retarding
$16.00
6 hour set retarding
$20.00

EasyFlow

Range Price/m3
Extended. (Max. 230mm slump)
Upon Request
High. (Max. 190mm slump)
$20.00
Mid. (Max. 150mm slump)
$16.00
Lightweight mixes (Requires EasyFlow High)
Upon Request
FiberMax Price/m3
Micro
$22.00
Fibrillated
$22.00
Macro
Upon Request
RustGuard/Corrosion Inhibitors Price/L
$5.00

First-Up
Prices / m3. 75%* of 28 day strength in:

Strength 24 hours 48 hours 72 hours
20 MPa
ADD
$53.00
$46.00
$40.00
25 MPa
ADD
$55.00
$48.00
$42.00
30 MPa
ADD
$57.00
$50.00
$44.00
35 MPa
ADD
$59.00
$52.00
$46.00
40 MPa
ADD
$64.00
$54.00
$48.00
35 MPa C-​1
ADD
$65.00
$57.00
$50.00
*Based on proper curing temperatures in accordance with CSA requirements.
Get-Set Price/m3
Get-Set 1 (10°C to 8°C)
$35.00
Get-Set 2 (7°C to 5°C)
$40.00
Get-Set 3 (4°C to -1°C)
$47.00
Get-Set 4 (-2°C to -7°C)
$60.00

Pump Mix

Minimum Strength Pumped Price/m3
20 MPa
$15.00
Strengths over 25 MPa
Upon Request
Lightweight mixes (Requires EasyFlow High)
Upon Request
2″ Pump Mix (Includes EasyFlow High 10/14 AGG)
$50.00

Redi-Pave

Strength Price/m3
32 MPa C-2 Redi-Pave 1 (25 MPa @ 1 Day)
$55.00
32 MPa C-2 Redi-Pave 2 (25 MPa @ 2 Days)
$48.00
32 MPa C-2 Redi-Pave 3 (25 MPa @ 3 Days)
$42.00
32 MPa C-2 Redi-Pave HE (32 MPa @ 7 Days)
$30.00
32 MPa C-2 Redi-Pave XL (32 MPa @ 24 Hrs.)
$350.00
32 MPa C-2 Redi-Pave FT (20 MPa @ 5 Hrs.)
Upon Request

Your Guide to Seamless Service

CBM ensures top-quality ready-mix concrete arrives on time with a professional touch, offering the adaptability you need on every project.

GTA Ordering Guidelines

Streamlined scheduling powers reliable deliveries, so these guidelines let us deploy resources effectively to support your timeline.

  • Lead time: Place orders by 12:00 noon the previous day for best results.

  • Volume details: Indicate total cubic metres and desired pour rate per hour.

  • Radio bookings: Discouraged; confirm verbally by phone same day if unavoidable (follow-ups okay via radio).

  • On-call scheduling: Confirmed first, then slotted per availability.

  • Cancellations: Pre-load only.

  • Updates: Call dispatch right away for changes.

GTA Service Promise

We target on-schedule arrivals and uninterrupted pours, finishing your core order promptly, with extras as feasible. Route all requests through the Central Dispatch Office, who prioritize workable timings.

Dispatch Schedule

7:00 a.m.–5:00 p.m., Monday–Friday. Off-peak orders are handled based on truck supply.

Site Essentials

  • Set up clear access and workflow.

  • Assign trained flaggers and receivers.

  • Cut returns to maintain peak service levels.

Need a printer-friendly price list?

Download Price List (Print Friendly)

Fuel Flex Surcharge 

The CBM Flex Fuel Surcharge helps offset significant swings in diesel fuel and related energy costs associated with producing and delivering ready-mix concrete. It is calculated monthly using the published Toronto rack diesel fuel price from Natural Resources Canada and applied on a per‑cubic‑metre basis to delivered loads.

Safety Data Sheets

Safety Data Sheets (SDS) help ensure safe, proper use of our ready-mix concrete products. They detail key information on hazards, first aid, precautions, fire response, handling/storage, exposure controls, and personal protective equipment, as well as physical/chemical properties, toxicology, disposal, and regulatory compliance.

Aperçu de la confidentialité
Canada Building Materials

Ce site web utilise des cookies afin de vous offrir la meilleure expérience utilisateur possible. Les informations contenues dans les cookies sont stockées dans votre navigateur et permettent, par exemple, de vous reconnaître lorsque vous revenez sur notre site et d'aider notre équipe à comprendre quelles sections du site vous trouvez les plus intéressantes et utiles.

Cookies strictement nécessaires

Les cookies strictement nécessaires doivent être activés en permanence afin que nous puissions enregistrer vos préférences en matière de paramètres de cookies.

Analytique

Ce site web utilise Google Analytics pour collecter des informations anonymes telles que le nombre de visiteurs sur le site et les pages les plus populaires.

Le fait de laisser ce cookie activé nous aide à améliorer notre site web.